Without proper cleaning, you notice a diminishing flame, making your cooking inefficient. Today, you will learn how to clean gas burner covers with vinegar and baking soda, items you can find in your kitchen.
Why You Should Clean Your Gas Burner Cover
One of the common reasons people choose gas stoves over other forms of cooking fuel in the kitchen is their ease of control. However, with dirt on your burner, you notice your control and precision diminishing.
Usually, the gas ports start to clog with the residue that falls on them. It could be the grease that splattered when you were cooking or the food that fell on your gas range as you were flipping your mix.
Dirt on the gas burner cap is disgusting, to say the least. It leaves your kitchen with an unsightly scene, and honestly, it does not speak much about your kitchen hygiene.
So, to prevent the inefficient use of your gas range and add a touch of perfection to your kitchen, cleaning your gas burner should be a must-do whenever you are cleaning your gas range.
Most people try to use staples and elbow grease, but that can only do so much for you. For an efficient and more practical solution, keep reading to find out how to clean your stove protector with simple home ingredients like vinegar and baking soda.
Tools and Ingredients
You need to clean your gas range cover at least once a month as a good rule of thumb. However, the frequency will depend on how often you use your gas range and how much mess you make while cooking.
Baking soda and vinegar are readily available in almost every home, and you can use them to clean your gas burner cover.
Here is a list of tools and ingredients you will need to clean your gas range cover:
- A spray bottle
- Water
- White vinegar
- Baking soda
- A scrub brush/ toothbrush
- A small dish
Steps to Cleaning Your Gas Burner Cover
Cleaning the grime and soot stuck on your gas range cover can be messy. It is even more challenging if the dirt has been on there for a long time and burnt into place.
Cleaning the burnt-on grime can seem impossible, but it is not. In fact, it can be therapeutic to watch as the dirty stove cap comes back to its original glory in less than half an hour.
Here is How to Clean Gas Burner Covers:
- Cool the burner: This is a natural process. As the burner cools, remove the grill, the burner heads, and caps. If these parts are still hot, you can use a potholder or an oven mint to avoid burning your hands.
- Create your water-vinegar mixture: The solution for cleaning your burner cap is a 50-50 mixture of water and vinegar. That means 1-part water and 1-part vinegar.
- Coat the burner caps with the mixture: Fill up your spray bottle with the water-vinegar mixture and spray a generous amount on the gas caps. Ensure you coat every inch of the gas burner covers.
- Wait: After coating the caps with the water-vinegar mixture, let them sit for 15-20 minutes.
- Create a baking soda paste: Mix water and baking soda in a dish to create a paste as you wait. Make sure you mix the water and baking soda thoroughly to avoid any lumps from forming.
- Coat the burner covers: Apply the baking soda paste to the gas burner covers, coating them with a thin layer. Allow the gas burner cover to sit for another 15-20 minutes.
- Scrub: Using your scrub brush or toothbrush, gently scrub the gas burner cover to remove any grime and caked-on foods.
- Rinse: Rinse the gas burner cover in clean water, dry it and reassemble your gas burner.
Safety Tips:
As you learn how to clean your gas burner cover with vinegar and baking soda, you should observe a few safety tips. These include:
- Cool everything down before you can touch or handle them
- Always turn off your gas before you start working on the burner. If you have a dual-fuel gas range (gas & electricity), ensure you also power it down before handling the gas burner cover
- When you decide to remove some of the grime first, make sure you do so with a paper towel and not a knife
- Avoid dropping food particles on the gas pipes or burner. This could cause blockage
If it is your first time cleaning, make sure you master the order you took your gas burner apart for easier reassembly.